Definition of Crown Molding

Crown Molding

A molding used on cornice or wherever an interior angle is to be covered, especially at the roof and wall corner.

Creditor Proof Protection

The creditor proof status of such things as life insurance, non-registered life insurance investments, life insurance RRSPs and life insurance RRIFs make these attractive products for high net worth individuals, professionals and business owners who may have creditor concerns. Under most circumstances the creditor proof rules of the different provincial insurance acts take priority over the federal bankruptcy rules.
The provincial insurance acts protect life insurance products which have a family class beneficiary. Family class beneficiaries include the spouse, parent, child or grandchild of the life insured, except in Quebec, where creditor protection rules apply to spouse, ascendants and descendants of the insured. Investments sold by other financial institutions do not offer the same security should the holder go bankrupt. There are also circumstances under which the creditor proof protections do not hold for life insurance products. Federal bankruptcy law disallows the protection for any transfers made within one year of bankruptcy. In addition, should it be found that a person shifted money to an insurance company fund in bad faith for the specific purpose of avoiding creditors, these funds will not be creditor proof.

Area Walls

Corrugated metal or concrete barrier walls installed around a basement window to hold back the earth.

Balloon Framed Wall

Framed walls (generally over 10' tall) that run the entire vertical length from the floor sill plate to the roof. This is done to eliminate the need for a gable end truss.

Built-Up Roof

A roofing composed of three to five layers of asphalt felt laminated with coal tar, pitch, or asphalt. The top is finished with crushed slag or gravel. Generally used on flat or low-pitched roofs.

Bull Nose Drywall

Rounded drywall corners.

Cornice

Overhang of a pitched roof, usually consisting of a fascia board, a soffit and appropriate trim moldings.

Gable End Wall

The triangular end of an exterior wall above the eaves formed under a gable roof.

Gable Roof

A roof that consists of two sloping planes that meet at the ridge or peak. The planes are supported at their ends by triangular, upward extensions of walls known as gables.

Hip Roof

A pitched roof with sloping sides.

Interior Finish

aterial used to cover the interior framed areas of walls and ceilings

Knee Wall

A wall-like structure that supports roof rafters.

Load-Bearing Wall

Includes all exterior walls and any interior wall that is aligned above a support beam or girder. Normally, any wall that has a double horizontal top plate.

Nonbearing Wall

A wall supporting no load other than its own weight.

Roof Valley

The "V" created where two sloping roofs meet.

Roof Vent

A louver or small dome mounted near the ridge of the roof to allow the passage of air through the attic.

Shed Roof

A roof that pitches up further on one side than the other. Shed roofs are also used over some porches.

Trombe Wall

A passive solar wall, usually masonry or concrete, used for passing heat from one room (like a sun room or solar garden room) to another.

Wall Out

When a painter spray paints the interior of a home.

Related to : home, mortgage, insurance, homebuyer, real estate, property, buy home, home insurance, financing, home financing, home buyer, first time homebuyer, homes, homebuying, credit, condo.