Definition of Cavity

Cavity

The empty space between studs or joists to place insulation batts.

Replacement

This subject of replacement of existing policies is covered because sometimes existing life insurance policies are unnecessarily replaced with new coverage resulting in a loss of valuable benefits. If someone suggests replacing your existing coverage, insist on having a comparison disclosure statement completed.
The most important policies to examine in detail are those which were issued in Canada prior to December 2, 1982. If you have a policy of this vintage with a significant cash surrender value, you may want to consider keeping it. It has special tax advantages over policies issued after December 2, 1982.
Basically, the difference is this. The cash surrender value of a pre December, 1982 policy can be converted to an annuity in accordance with the settlement options in the policy and as a result, the tax on any policy gain can be spread over the duration of the annuity. Since only the interest element of the annuity payment will be taxed, there will be less of a tax impact on the annuitant. Policies issued after December 2, 1982 which have their cash surrender value annuitized trigger a disposition and the annuitant must pay tax on the total policy gain immediately. If you still decide to replace existing coverage, don't cancel what you have until the new coverage has been issued.

Air Space

The area between insulation facing and interior of exterior wall coverings. Normally a 1" air gap.

Crawlspace Foundation

The space between the ground and the first floor of a home, usually no higher than four feet.

Crawlspace Vent

An opening to allow the passage of air through the unexcavated area under a first floor. Ideally there should be at least two vents per crawlspace.

Faced Insulation

insulation with an attached vapor retarder (kraft paper or foil-backed paper).

Fiber Glass Insulation

An energy-efficient glass fiber product manufactured by Owens Corning to ensure the best thermal and noise control performance available.

Insulation Density

Denser insulation products have more fibers per square inch and, therefore, give you greater insulating power through higher R-values.

Metal Insulation Support

16" or 24" wire rod or crisscrossed wire to hold floor insulation in place.

Reflective Insulation System

Reflective insulation System is formed by a combination of low emittance surfaces and air spaces that provide reflective cavities, which have low levels of radiant energy transmission.

Un-faced Insulation

insulation with no attached vapor retarder.

Related to : home, mortgage, insurance, homebuyer, real estate, property, buy home, home insurance, financing, home financing, home buyer, first time homebuyer, homes, homebuying, credit, condo.